Cambridge-soundworks FPS2000 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
Typically, the 3 meter speaker
cables will connect the front
satellites to the subwoofer and the
5 meter cables will connect the
rear satellites to the subwoofer.
A panel of eight self-adhesive
labels is provided to identify each
satellite and the opposite end of
the cable connected to a satellite.
1. Identify the two 3 meter
cables. Most satellites will be
used with their desktop
stands. In this case, thread one
end of a 3 meter cable through
the hole in the desktop stand.
Connect this end to one
satellite, (as shown in diagram
E). If used, carefully insert the
desktop stand’s attachment
arm into the socket in the back
of the satellite, taking up any
slack in the cable as required.
2. Remove the backing from the
small, round “FRONT LEFT”
label and apply it to the back
of the satellite (see diagram E).
3. Remove the backing from the
remaining, longer “FRONT
LEFT” label and wrap it
around the opposite end of the
speaker cable you just
connected.
Satellite Connections
5
4. Connect this end of the speaker
cable to the red and black
“FRONT LEFT” speaker
connectors on the subwoofer.
5. Repeat this process for the
Front Right, Rear Right and
Rear Left satellites. Be sure to
use the remaining 3 meter
cable for the other front
speaker.
Diagram E
To connect the speaker wires to the
spring loaded connectors on the
satellite and subwoofer, push back
on a spring-loaded tab to expose the
connection hole. Insert the bare end
of the wire into the exposed hole,
then release the tab to lock the wire
in place.
Connect wires with red bands to
red tab connectors and unmarked
wires to black tab connectors.
Notes: Matching red wires to red
tabs and unmarked wires to black
tabs insures the speakers all play
“in-phase”. “Out of phase”
connections will do no electrical
harm, but the positional audio
sound quality will be greatly
reduced. You can substitute regular
18 gauge speaker wire to create
longer cables, if needed.
E
FPS2000 Rev.C 4/17/00, 4:09 PM9
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments